The Luxor system adds Color to existing zoning and dimming options. A Color system requires that a ZDC LED board be installed into each desired FX LED fixture. Standard and ZD-enabled FX fixtures will zone and zone/dim (respectively) on the Luxor Controller, but Color is achieved only through the use of specific ZDC LED boards. Colors are selected on the Color Pallete screen. The Luxor can store up to 250 preset colors labeled numerically. Each color requires hue and saturation values. Hue is the primary attribute of a color. The selected value is found on the standard color wheel and is represented by numeric values between 0 and 359. Saturation is the percentage of hue seen with white light filling in the remainder (e.g., 80% saturation is 80% of the selected hue and 20% of white light). If using the color wheel option, see the note below.
NOTE: Color Wheel assignment (CW1-CW10) must be done at the controller facepack level. These group numbers will appear in numbers as C251-C260 within the app.
| Location |
Group Number |
| Controller |
CW1-CW10 |
| App |
C251-C260 |
Visit our Color Quick Start guide for suggested equivalent colors.
