- To utilize the LAM, open the Luxor App on a device that is associated with the same network as the controller with the fixtures that will be assigned.
- Insert the LAM into the headphone jack of an iOS or Android device.
- Tap the Menu
icon on the upper left-hand side.
- Tap Assign Lights.
- Once on the assignment screen, select the desired Group from the drop-down list. All lights will illuminate at 50% intensity.
- Point the LAM at the fixture that will be assigned.
- Tap Press Hold To Assign until your phone vibrates and your light turns off. Once a fixture is assigned, the device will vibrate, lights will turn off, and a confirmation notification will appear on the screen. The remaining lights will remain in Assignment mode and can continue to be assigned to the same Group. Once fixtures have been assigned, exit the assignment mode from the application by selecting the back button.
Note: The LAM should be removed from a device while not in use to conserve LAM battery life. The LAM battery may need to be replaced if it suddenly stops functioning. Replace with a CR2032 coin cell battery. Some devices may ask to access the microphone jack, and you must select OK for the LAM to work.
