All fixtures wired to the dimmer will illuminate to the intensity set on the DIM-LV. When the lighting transformer is powered on (output low voltage to field), the dimmer will turn on the fixtures to the last set intensity value.
- Turn on the lighting transformer and confirm that the DIM-LV display is illuminated. The LCD will display the last set intensity value. For new installs, the value will be 50%.
- To adjust fixture intensity, use the + or - buttons to increase or decrease intensity. Pressing and holding down the + or - buttons increases the speed of adjustment.
NOTE: Dimming levels are unique to each lighting fixture and lamp. Some lamps and fixtures may shut off prior to reaching 0% intensity