Replacing the LED lamp in Terra™ TG-61 and TN-61 In-Grade fixtures involves removing a few parts, disconnecting the old board from the socket, and installing a new compatible lamp. It’s a straightforward task but requires care to avoid damaging components or wiring.
A lamp might need to be replaced for a couple of reasons:
- Burnout or failure: Although LED lamps have a long lifespan, they can still fail due to overheating from an electrical surge or water intrusion.
- Flickering: If the lamp light starts to flicker, it may not indicate a faulty lamp; we advise proper testing before replacement. Learn More
Tools required: You'll need a 3⁄32" Allen key.
Turn off the power to the lighting transformer before disassembling the fixture.
Remove the screws from the faceplate with a 3⁄32" Allen key.
Remove the Lens Assembly and Snap Ring Lens Holder, then set aside.
Remove the MR-16 Lamp by pulling outward from the socket assembly.
Once the MR-16 has been removed, reverse the removal steps to install the replacement lamp. For a complete list of compatible lamps, visit the MR-16 LED Lamp Chart on each parts list page.
Still need help? We're here.
Tell us what you need support with and we'll find the best solution for you.