Wall Lights

This section lists important support information about Designer and Standard Series Wall Lights. Select an image below to view the Documents page for that fixture. Available information includes the Spec Sheet, Parts List, Photometrics, and Installation Details.

Designer Series Wall Lights

Models Led
CP, HS, LF, LM, MO, MS, PD, PO, SL, UN, VO, RH, VK, SF Integrated

Standard Series Wall lights

Models Lamps
CG MR-16
CP, LD, LM, MM, PD, UN,CL-31 G4
Support Topics
  • LightingShrink Wire® Connectors
    With any low voltage lighting system, waterproof connections are crucial to maximizing the life of the system. A two-step installation process ensures a fail-proof connection in
  • DBRY-6 Direct Bury Splice Kit
    DBRY-6 Direct Bury Splice Kit With any low voltage lighting system, waterproof connections are crucial to maximizing the life of the system. 3M's DBRY-6 shown here are the
  • SF - LED Board Replacement
    The LED board is a replaceable part that can be changed with a few simple steps. To purchase the LED Board Replacement Kit for the SF Surface-Mounted Wall Light, find an authorized
  • RH - LED Board Replacement
    The LED board is a replaceable part that can be changed with a few simple steps. To purchase these kits, find an authorized FX Luminaire distributor near you using our interactive
  • VK - LED Board Replacement
    Tools Required: #2 Philips screwdriver 2 mm Allen key Soft-edged pry device (e.g., small flathead screwdriver)
  • HS - LED Board Replacement
    The LED board is a replaceable part that can be changed with a few simple steps. To purchase these kits, find an authorized FX Luminaire distributor near you using our interactive
  • CP/UN - LED Board Replacement
    Tools Required: Flathead screwdriver 3/32" Allen Key Soft-edged pry device (e.g., small flathead screwdriver)
  • LM/PD - LED Board Replacement
    Tools Required: Flathead screwdriver 3/32" Allen Key Soft-edged pry device (e.g., small flathead screwdriver)
  • LF - LED Board Replacement
    The LED board is replaceable and can be changed in a few simple steps. You can replace the LED board in a few simple steps. To purchase the LED Board Replacement Kit for the LF
  • MS - LED Board Replacement
    Tools Required: #2 Philips screwdriver 5/64” Allen Key Soft-edged pry device (e.g., small flathead screwdriver) Needle-Nose pliers
  • PO/MO - LED Board Replacement
    Tools Required: #2 Philips screwdriver Soft-edged pry device (e.g., small flathead screwdriver)
  • SL - LED Board Replacement
    Tools Required: #2 Philips screwdriver 1.5 mm Allen Key Soft-edged pry device (e.g., small flathead screwdriver)
  • LD Ledge Light: Replacing the G4 LED Lamp
    Materials Required: G4 LED Lamp - G4, 2700K, 20 W, 12 V (P/N: G4LED20W) Learn more​ NOTE: Do not attempt to use halogen or xenon lamps. The lens can overheat and
  • Non Serviceable Models
    The fixtures listed in the chart below are limited to service and parts. If necessary, the FX fixture can be exchanged under warranty at the original point of purchase or through
  • How do I replace my existing halogen wall light with the new LED version?
    FX has made it really easy to make this switch. Follow these step by step instructions to make your install as effortless as possible.   STEP ONE
  • Checking Voltage Using Voltmeter
    Using a digital voltmeter allows you to take important voltage readings at the transformer, at each fixture and at the receptacle the transformer will be plugged into. Dial the
  • Dimensions
    Reference the exact measurements in the wall light dimensions provided below to ensure proper product installation. MO Recessed Wall Light PO Recessed Wall Light LM and
  • RH - Mounting Bracket and Junction Box Compatibility Sheet
    This compatibility sheet will allow installers to quickly identify the correct bracket type required for the RH fixture and junction box pairing, minimizing installation errors and
  • Warranty
        Statement of Warranty Hunter Industries Incorporated (“Hunter”) warrants FX Luminaire (“FX”) Transformers to be free of defects in materials or workmanship under
  • Filters
    LED Filters: Every FX wall light includes the available filters for the style fixture.  These filters can also be stacked on each other to create custom or richer colors.  
  • Parts
    Our comprehensive parts list is designed to make your search simple and efficient. Whether you're a seasoned professional or a curious DIYer, we have the parts information you need

Get FX Luminaire