Garden™ CP
Overview
The CP is engineered to bring light to walkways, stairways, and decks. In addition, the CP is helpful for lighting other areas with high foot traffic hazards that do not have an adjacent planter area for path lighting, or trees and trellises from which to down light.
- Slim, unobtrusive low-profile design offers minimalist aesthetics to accommodate other elements inside the wall
- Built-in Luxor® Technology enables powerline zoning and smooth PWM dimming with the industry-leading Luxor Controller
- Available in a warm (2700K) and soft (3000K) color temperatures
- Available in a wide range of powder-coated finishes to suit all exterior designs and preferences
- Custom recessed installation kit included
Configure Product
Select from the options below to configure this product, then add it to your My List.
Lighting Engine
Powerboard Integrated LED
G4
Luxor Control
ZD
Zone/Dim with Luxor
Power
1LED
2.4 VA
Lamp
LED20
1.3 VA G4 Lamp (20W equivalent Lamp)
E2
1.3 VA G4 LED Lamp (Eco Lamp Series)
LED Color
W
Warm (2700K)
S
Soft (3000K)
Finish
Antique Bronze (AB)
Bronze Metallic (BZ)
Black (FB)
Sedona Brown (SB)
Desert Granite (DG)
Weathered Iron (WI)
Flat White (FW)
Silver (SV)
Natural Copper (CU)
Accessories
Select Type
- All Accessories
- Recommended
- Power
- Mounting
- Filters
- Splicing
- Glare
- Lenses
- Replacement Lamps
Specifications
Note: Faceplate width with louver is 0.50”
| 1 LED | |
|---|---|
| Halogen Lumen Output Equivalent | 10W |
| Useful LED Life (L70) | 50,000 hrs avg |
| Input Voltage | 10 to 15V |
| VA Total (Use this number to size the transformer) | 2.4 |
| Watts Used | 2.0 |
| Lumens per Watt (Efficacy)5 | 5 |
| Max Lumens | 10 |
| CRI (Ra) | 86 |
| CCT | |
| Amber Filter | 2700K |
NOM UL 1838
Vertical and horizontal ½" (13 mm) NPT knockouts. Sleeve protector included, preventing caving during wall fabrication.
ZD option utilizes Luxor technology to zone light fixtures in up to 250 groups, and dim each group in 1% increments between 0 and 100%.
Made In Mexico
CSA C22.2 NO. 250.7
EN 55015,EN 61000-3-2,EN 61000-3-3,EN 61547
Outdoor
UL 1838
Stamped C110 copper faceplate with frosted polycarbonate lens.
FCC CFR Part 15 Subpart B
Options of natural copper finish, antiqued finish with brushed (Antique Bronze) or tumbled (Antique Tumbled) effect, or TGIC powder coat finish. Antique finishes sealed with a clear TGIC powder coat layer.
Tamper-resistant stainless steel fasteners included.
Die-cast aluminum housing with capacity for one 1LED integrated LEDs.
10 to 15 VAC/VDC, 50/60 Hz. Remote transformer required (specify separately)
Compliant per IEC 60598-1 and IEC 60598-2-7 when used with International Wall Kit (“EKITWALL”).
Compliant per IEC 60598-1 and IEC 60598-2-7 when used with International Wall Kit (“EKITWALL”).
Compliant per IEC 60598-1 and IEC 60598-2-7 when used with International Wall Kit (“EKITWALL”).
IP64
ICES-005
Integrated module with Cree LEDs. Gold-plated connectors and conformal coated for maximum reliability and corrosion resistance. Proprietary on-board intelligent driver uses firmware-controlled temperature regulation, maximizing LED life. Field upgradeable and replaceable, the LEDs are rated to 50,000 hrs. Maximum drive current: 1 A.
Polycarbonate lens with shock resistance and high tolerance for thermal expansion and stress.
L70 rating conforms to IES LM-80/TM-21 standards, projecting lumen maintenance to 70% of initial output.
EN 60598-1,EN60598_2_2
Stamped C110 copper faceplate, A380 aluminum housing, PBT construction box/sleeve, and stainless steel hardware.
Polycarbonate color temperature adjustment lenses included with fixture: 2,700K (pre-installed), 3,900K (no lens), 4,500K and 5,200K options specified separately. Color temperature lenses are field serviceable.
Specified power consumption indicates the full apparent power.
Socket contains MoistureBlock™ technology, preventing moisture from wicking up into sealed areas of the fixture.
Innovation meets conservation in the design and manufacturing of our products. Where we can, we use recycled materials while maintaining superior functionality. Our LED products provide high-quality light at optimal energy efficiency, lifespan, and durability.
2.3 lbs. (1.0 kg)
18 AWG (1 mm); SPT-1W; 220°F (105°C); 300V; 10' (3 m) length
Documents
Select Type
- All Documents
- Specifications
- Installation
- Marketing
- Photometrics
- Replacement Parts
- Software
| Document Name | Actions |
|---|
Photos
Studio Photos
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original

