Designer™ LF
Apžvalga
The LF is our LED under-the-cap hardscape wall light. It can easily be fitted between a block wall and capstone for a neat, clean installation. Due to its modular bracket design, the LF can even be installed under railings and existing construction.
- Slender luminaire delivers an optimal amount of light exactly where it's needed
- Surface-mounted with stainless steel hardware
- Built-in Luxor® Technology enables powerline zoning, smooth dimming, and RGBW color-changing with the Luxor Controller
- Available in static color and dynamic RGBW color-changing options
- Meets ADA requirements for sconce depth from wall
- DarkSky approved with a U0 BUG rating for a glare-free experience
- Available in a wide range of powder-coated finishes to suit all exterior designs and preferences
Configure Product
Select from the options below to configure this product, then add it to your My List.
Luxor Control
[Default]
On/Off | Phase Dimmable | Zone with Luxor
ZDC
Zone/Dim/Color with Luxor
ZD
Zone/Dim with Luxor
Power
1LED
2.4 VA
[Default]
Default ZDC Option 6.0W/7.2VA
LED Color
[Default]
Default ZDC option 11.0 VA
W
Warm (2700K)
S
Soft (3000K)
C
Cool (4000K)
Compliance
[Default]
North America (UL Listed)
E
International (CE Certified)
Finish
Natural Brass (BS)
Antique Bronze on Brass (BSAB)
Bronze Metallic (BZ)
Black (FB)
Sedona Brown (SB)
Desert Granite (DG)
Weathered Iron (WI)
Flat White (FW)
Silver (SV)
Natural Copper (CU)
Antique Bronze on Copper (CUAB)
Stainless Steel (SS)
Accessories
Select Type
- All Accessories
- Recommended
- Power
- Mounting
- Filters
- Splicing
- Glare
- Lenses
- Replacement Lamps
ST-UV
Step-Down Transformer, UV (120/277 V to 12 V)
Specifications
| Output | 1LED | ZDC |
|---|---|---|
| Total Lumens† | 95 | 35-85 |
| Input Voltage | 10 to 15V | 11 to 15V |
| Input Power (W) | 1.9 | 3.6 |
| VA | 2.2 | 4.3 |
| Efficacy (Lumens/Watt) | 52 | 21 |
| Color Rendering Index (CRI) | 84 | 80+ |
| Max Candela | 38 | 17.1 |
| Dimming | PWM, Phase** | PWM, Phase** |
| Luxor Compatibility | ||
| Default | Zoning | Zoning |
| ZD Option | Zoning/Dimming | -- |
| ZDC Option | -- | Zoning/Dimming/Color |
| Minimum Rated Life (L70 B10) | L70 (hrs) 72,000 | 55,000 Hrs |
| BUG Rating | B0-U0-G0 | B0-U0-G0 |
† Measured using the 3,900K CCT lens. Multipliers for other CCTs include 0.80 (2,700K).
** For optimal performance, use a trailing-edge, phase-cut dimmer.
IDA, CB Scheme, CE, RoHS, RCM, NOM UL 1838
ZD and ZDC options utilize Luxor technology to zone light fixtures in up to 250 groups, dim each group in 1% increments between 0 and 100%, or change to one of 30,000 colors with RGBW LEDs. Select the ZD option for zoning/dimming or ZDC for zoning/dimming/color. Standard fixture is zoneable with Luxor.
Made In Mexico
CSA C22.2 NO. 250.7
EN 55015,EN 61000-3-2,EN 61000-3-3,EN 61547
Outdoor
UL 1838
Stamped stainless steel, brass, or copper faceplate.
FCC CFR Part 15 Subpart B
Options of natural copper/ brass, stainless steel finish, powder coated, or antiqued finish with brushed (Antique Bronze) or tumbled (Antique Tumbled) effect. Antique finishes sealed with a clear TGIC powder coat layer.
Stainless steel acorn nuts for tamper-resistance and proper adjustment.
Capacity for rectangular 1LED integrated LED.
10 to 15 VAC/VDC, 50/60 Hz. Remote transformer required (specify separately)
IP65
ICES-005
Integrated module with Cree LEDs. Gold-plated connectors and conformal coated for maximum reliability and corrosion resistance. Proprietary on-board intelligent driver uses firmware-controlled temperature regulation, maximizing LED life. Field upgradeable and replaceable, the LEDs are rated to 50,000 hrs. Maximum drive current: 1 A.
L70 rating conforms to IES LM-80/TM-21 standards, projecting lumen maintenance to 70% of initial output.
EN 60598-1,EN60598_2_2
Die-cast C360 brass or A380 aluminum housing with stainless steel, brass, or copper faceplate (when applicable) and hardware.
Polycarbonate color temperature adjustment lenses included with fixture: 2,700K (preinstalled), 3,900K (no lens). Color temperature lenses are field serviceable.
Specified power consumption indicates the full apparent power.
Innovation meets conservation in the design and manufacturing of our products. Where we can, we use recycled materials while maintaining superior functionality. Our LED products provide high-quality light at optimal energy efficiency, lifespan, and durability.
Socket contains MoistureBlock™ technology, preventing moisture from wicking up into sealed areas of the fixture.
Documents
Select Type
- All Documents
- Specifications
- Installation
- Marketing
- Photometrics
- Replacement Parts
- Software
Photos
Application Photos
Download Image
Medium Original
Download Image
Medium OriginalStudio Photos
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original
Download Image
Medium Original



