Filter

Support
Specialty Lights

LP - Install Notes

Tabs

Read Article
LP
  • FAQ, Installation, Programming

Step 1

For LP-VR, use 2.0" (51 mm) schedule 40 PVC or core drill to fixture dimensions. For LP-HZ, use standard conduit for wire run.

Step 2

Install the conduit CHASE below the water feature.

Step 3

Thread WIRE through the conduit.

Step 4

Use a VOLTMETER to ensure 11 to 15 V at the fixture and apply installation cover.

Step 5

Connect wiring with a WATERPROOF CONNECTOR in a dry area. Learn more

Rate this Article: 
0
No votes yet

Was this article helpful? Yes | No